WallaBuds Clip Open Ear
This guide will help you set up, use, and care for your WallaBuds Clip Open Ear wireless earbuds
Download Product Manual here.
Product Overview
Product Name: WallaBuds Clip Open Ear
Design: Open-ear clip style
Water Resistance: IPX4 (sweat & splash resistant)
Color: Black (glossy upper case, matte rubber-finish lower cover)
Key Features
-
Open-ear clip design for comfort and awareness
-
Large 11mm drivers for rich, full sound
-
Dual MEMS microphones for clear calls
-
Stable Bluetooth 6.0 connection
-
Long battery life with compact charging case
-
Automatic open-and-connect with hall sensor
-
USB Type-C fast charging
What’s Included - Inside the box you will find:
-
WallaBuds Clip Open Ear earbuds (left & right)
-
Charging case
-
USB Type-C charging cable
-
User manual
Getting Started
Before First Use
-
Remove all packaging materials.
-
Place both earbuds into the charging case.
-
Fully charge the charging case before first use.
-
Earbuds: about 60 minutes
-
Charging case: about 2.5 hours
Charging Instructions
Charging the Earbuds
-
Place the earbuds into the charging case.
-
Charging starts automatically.
-
Full charge takes approximately 60 minutes.
Charging the Charging Case
-
Connect the USB-C cable to the charging case.
-
Plug into a 5V power source.
-
Allow up to 2.5 hours for a full charge.
A fully charged case can recharge the earbuds about 6.5 times, providing 28–30 hours of total playtime.
Pairing with Your Device
-
Open the charging case.
-
Remove both earbuds.
-
Turn on Bluetooth on your phone or device.
-
Select “WallaBuds Clip Open Ear” from the Bluetooth list.
-
Once connected, the earbuds will reconnect automatically in the future.
Bluetooth range: 10 meters (33 ft) in open spaces.
Using the Earbuds
Wearing the Earbuds
-
Clip each earbud gently onto your ear.
-
Adjust until it feels secure and comfortable.
-
The open-ear design allows you to stay aware of your surroundings.
Audio & Call Quality
-
Equipped with 11mm dynamic drivers for balanced sound.
-
Frequency response: 20Hz–20kHz
-
Each earbud includes one omni-directional MEMS microphone.
-
Designed for clear voice pickup during calls.
Note: These earbuds do not support ANC or ENC noise canceling.
Earbud Controls + Indicator Light Guide (waiting for the PDF copy if the IM, insert control table in this section)
Battery & Performance
Playtime
-
4.5–5 hours at 50% volume
-
About 4 hours at maximum volume
-
28–30 hours total with charging case
Standby Time
-
Connected standby: up to 140 hours
-
Power-off storage: up to 90 days
Water Resistance
-
Rated IPX4
-
Resistant to sweat and light splashes
✅ Suitable for:
-
Exercise and workouts
-
Commuting
-
Daily use
❌ Not suitable for:
-
Swimming
-
Showering
-
Full water submersion
Safety & Care Tips
-
Store earbuds in the charging case when not in use
-
Clean gently with a dry, soft cloth
-
Avoid extreme heat or moisture
-
Do not attempt to open or modify the earbuds
-
Use only certified charging accessories
Troubleshooting
Earbuds won’t connect
-
Make sure Bluetooth is enabled on your device.
-
Place earbuds back in the case, then remove them again.
-
Keep earbuds within Bluetooth range.
One earbud has no sound
-
Check that both earbuds are charged.
-
Reinsert both earbuds into the charging case and reconnect.
Audio cuts out or stutters
-
Reduce distance from your device.
-
Avoid strong wireless interference.
Battery drains quickly
-
High volume levels reduce battery life.
-
Fully recharge earbuds and case regularly.
Frequently Asked Questions (FAQs)
Are these earbuds fully wireless?
- Yes. Each earbud connects wirelessly via Bluetooth.
Can I use one earbud at a time?
- Yes. Either earbud can be used independently.
Are they good for outdoor use?
- Yes. The open-ear design allows awareness of your surroundings.
Do they have noise canceling?
- No. WallaBuds Clip Open Ear does not support ANC or ENC.
What charging cable is used?
- USB Type-C (included).
Need More Help?
If you need assistance:
-
Email: support@wuzutech.com
-
Phone: (866) 479-1629
When contacting support, please include your order number and a short description of the issue.
Still need help? Create a support request with our customer service team and we'd be happy to help.